Antenna Installation Part 1, Dec 20, 2007


Revision as of 00:10, 4 January 2008 by Jgeorge (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

At last the site preparations are nearly complete and the pedestal was also ready to be fitted with the new antenna. Kyle Hollwarth, the mechanical designer of the antenna, and a two-man crew came to conduct the preparatory steps prior to antenna installation. The original sidearm/counterweight assemblies were modified to accept the additional counterweight required for the heavier antenna.

The cross-member resists the possiblity of differential torque between the sidearms stressing the antenna structure. It also limits the upward elevation movement to 96 degrees or less. This is required due to the fact that the center of the dish is now offset some 5 or 6 feet above the elevation axis.

In spite of a cold spell at the Greeley site, and several snowfalls, these steps were completed. The pedestal was rebuilt on the new pad, the antenna was put together on the ground, and finally hoisted into position on the new sidearms. All that remains at this point is to mount the sub reflector and feedhorn, and finally to check the surface accuracy and antenna geometry by using photogrammetry. These steps are expected to commence on January 7th, 2008.