Bright band polarimetric signatures

From CSU-CHILL

Revision as of 09:40, 9 August 2007 by Jgeorge (talk | contribs) (New page: Reflectivity contours overlaid on polarimetric color fills: center|RhoHV RHI plot center|LDR RHI plot [[Image:7jun03_zdr.png|center|ZDR R...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Reflectivity contours overlaid on polarimetric color fills:

RhoHV RHI plot
RhoHV RHI plot
LDR RHI plot
LDR RHI plot
ZDR RHI plot
ZDR RHI plot

Conceptual Summary

Frozen hydrometeors begin to melt as they fall through the 0C height level. The first hydrometeors to completely melt are the smaller, less massive particles. The larger particles spend more time in various partially frozen / water-coated states as they melt while descending. Additionally, particle aggregation and breakup also frequently occur at temperatures near 0C. The net result of these processes often generates distinctive polarimetric signatures. Reflectivity is enhanced as the particles initially develop a wet outer surface, producing the classical "bright band" pattern. With increasing distance below the 0C level, only the larger sized hydrometeors remain partially frozen. However, due to their large diameters, they strongly influence the polarimetric parameters. These large melting snow particles generally wobble as they fall; on average the orientation of their long axis is more nearly horizontal than vertical. The large particles thus cause the most positive ZDR and the least negative LDR values to be found several hundred meters below the height of the maximum reflectivity. At lower heights, these radar signal peaks fade out as the hydrometeors completely melt into quasi-spherical drops.

Annotated RhoHV PPI plot
Annotated RhoHV PPI plot
dBZ PPI plot
dBZ PPI plot

Examples of these general bright band patterns are shown in the above overlay plots. It is apparent that the ZDR and LDR peaks are found somewhat below the maximum reflectivity height. The correlation between the horizontally and vertically polarized return signals (RhoHV) also has a distinct minimum in the vicinity of the melting level. The coexistence of small, completely melted drops and larger, irregularly-shaped, melting aggregated snow particles causes a localized RhoHV decrease in this mixed particle regime. (The effects of differential phase shift upon backscatter from the large, wet aggregates can also reduce RhoHV (Zrnic et al., 1993).

In PPI scans through widespread stratifrom precipitation, bright band radar patterns have a roughly circular shape since the melting level is encountered at a fairly constant range on each sweep. Identification of the melting level in PPI data can be improved through the consideration of the polarimetric data fields. The two images below are taken from the the same PPI sweep. The melting level pattern is better defined by the RhoHV minimum than by the reflectivity bright band.

VCHILL

Main article: VCHILL

Load example in VCHILL

References

  • Herzegh, P. H. and A. R. Jameson. 1992: Observing Precipitation through Dual-Polarization Radar. Bull. Amer. Meteor. Soc., 73, pp 1365-1374.
  • Zrnic, D. S., N. Balakrishnan, C. L. Ziegler, V. N. Bringi, K. Aydin, and T. Matejka. 1993: Polarimetric Signatures in the Stratiform Region of a Mesoscale Convective System. J. Appl. Meteor., 32, pp 678-693.